Octagonal Spa with Equal Length & Width but Slightly Different Sides

How to Measure your Octagonal Spa

The information below details all the requirements for ordering a cover to suit an Octagonal spa with the same Length & Width measurement but slightly different sides.  If you find the details too involved, you may prefer to just watch the video and contact us via one of the contact forms in the right hand column.

MEASUREMENTS  &  INFORMATION  REQUIRED

MEASUREMENTS NEEDED

  • Length
  • Width
  • ​Length of each of the 8 sides ( Ends/Cut - Offs/Sides
  • ​Height of Lip  ( skirt length )

See Diagram 1 below for required measurements

Measure Octagonal Spa Cover

Diagram 1

LENGTH  &  WIDTH  MEASUREMENTS

Measure spa cover

Diagram 2

Always measure from the outside of the spa shell ( not including any wooden frame or surrounds ) - see Diagram 2 above. 

measure spa edge

Diagram 3

 If the lip flares out slightly, measure adjacent to the bottom of the lip, see Diagram 3 above or video below

MEASUREMENT  OF SIDES

Measure spa side

Diagram 4

The length of the sides is an important measurement to know for a correct fitting cover. See Diagram 4 above.  If the corners of the sides are curved, then see Diagram 5 below for information on how to measure correctly.

How to measure for a spa cover

Diagram 5

SKIRT  HEIGHT MEASUREMENT

measure spa skirt

Diagram 6

The distance from the top of the spa lip ( including any controls sitting less than 25 mm proud ) down to the bottom of the vertical spa lip, is the measurement required for ascertaining the length of the spa cover skirt.  See Diagram 6 above & video below.

FURTHER  INFORMATION  REQUIRED

COLOUR RANGE

Click here View the  Marine Vinyl Colours

WEIGHT BEARING

Click here to view the  Spa Cover strength options

LOCK OPTIONS

Click here to view the Cover lock location options