Rectangle Spa with 4 Cut Off Corners ( 3-piece )

Add Video

The information below details all the measurements and information required to order a spa cover for your particular spa.

I include this information for those of you who like to understand the full measuring process.  If you find the details too involved, you may prefer one of the options at right.

MEASUREMENTS  &  INFORMATION  REQUIRED

3-piece spa cover measurements

Diagram 1

MEASUREMENTS NEEDED

  •   Length
  •   Width
  • ​  Length of each of the cut off corners
  •   Length of Sides ( not essential but helps confirm spa )
  • ​  Height of Lip  ( skirt length )

See Diagram 1 at left for required measurements

LENGTH  &  WIDTH  MEASUREMENTS

Measure spa cover

Diagram 2

Always measure from the outside of the spa shell ( not including any wooden frame or surrounds ) - see 'diagram 2' above. 

measure spa edge

Diagram 3

 If the lip flares out slightly, measure adjacent to the bottom of the lip, see 'diagram 3' above.

CUT OFF MEASUREMENT  &  SKIRT  HEIGHT

Measure spa side

Diagram 4

The length of the cut offs is an important measurement to know for a correct fitting cover. See 'diagram 4' above.  If the corners of the cut offs are curved, then see diagram 6 below for information on how to measure correctly.

measure spa skirt

Diagram 5

The distance from the top of the spa lip ( including any controls sitting less than 25 mm proud ) down to the bottom of the vertical spa lip, is the measurement required for ascertaining the length of the spa cover skirt.  See 'diagram 5' above.

How to measure for a spa cover

Diagram 6

Rectangular spa with cut off corners

Rectangular spa with cut-off corners requiring a 3-piece spa cover

FURTHER  INFORMATION  REQUIRED

COLOUR RANGE

Click here to view the range of Marine Vinyl Colours

WEIGHT BEARING

Click here to view the  Spa Cover strength options

LOCK OPTIONS

Click here to view the  Spa Cover lock location options