How to Measure a Triangular or Corner Spa

The information below details the requirements for ordering a cover to suit a corner spa.  If you find the details too involved, you may prefer to contact us via one of the contact forms in the right hand column.

MEASUREMENTS  &  INFORMATION  REQUIRED

MEASUREMENTS NEEDED

•   Length
•   Width
• ​  Length of sides
•   Radius of any points on MK1 style corner spa
• ​  Height of Lip  ( skirt length )

See Diagram 1A & 1B below for required measurements

Diagram 1A – Corner Spa MK 1

Diagram 1B – Corner Spa MK 2

Corner Spa – MK1

Corner Spa – MK2

If your spa looks anything like either of the ones pictured above, then it’s best to contact us CLICK HERE and discuss your options. A photo will certainly help us identify which Corner Spa you have.

LENGTH  &  WIDTH  MEASUREMENTS

Diagram 2

Always measure from the outside of the spa shell ( not including any wooden frame or surrounds ) – see Diagram 2 above. 

Diagram 3

 If the lip flares out slightly, measure adjacent to the bottom of the lip, see Diagram 3 above or video below

MEASUREMENT OF SIDES 

Diagram 4

The length of all the sides is an important measurement for us to correctly identify your spa. See Diagram 4 above.  If the corners of the sides are curved, then see Diagram 5 or watch video below for information on how to measure correctly.

Diagram 5

SKIRT  HEIGHT MEASUREMENT

Diagram 6

The distance from the top of the spa lip ( including any controls sitting less than 25 mm proud ) down to the bottom of the vertical spa lip, is the measurement required for ascertaining the length of the spa cover skirt.  See Diagram 6 above & video below.

FURTHER  INFORMATION  REQUIRED

COLOUR RANGE

Click here View the Range of Marine Vinyl Colours

WEIGHT BEARING

Click here to view the  Spa Cover strength options

ORDER A COVER